Not only is it inconvenient, but it also wastes water when the toilet has to be flushed twice. Homeowners often encounter this plumbing problem, which may occur for several reasons. For instance, the issue may be brought on by a blocked drain, a broken flush valve, or an outdated toilet that has to be replaced. In this blog article, we’ll go through some fixes for a bathroom that requires two flushes. So if you’re experiencing this problem, stay reading.
Advice For Fixing A Toilet That Needs Repeated Flushing
Fixing your toilet should be one of your top priorities if it has to be flushed two or more times after each usage in your house. The following are suggestions for repairing a toilet that requires two flushes:
Check for Clogs
Checking if your toilet is blocked should be your priority. If there is, there must be a clog in the toilet’s pipes or the drain someplace. The buildup of material, such as hair, paper, or minerals, may cause clogging. You may use a plunger, a drain snake, or a vinegar-baking soda solution to fix the issue. If none of those solutions work, you may need a plumber to resolve the problem.
Inspect the Flapper Valve
If your toilet is not blocked, the issue can be brought on by a malfunctioning flapper valve. When you flush, the flapper valve releases the water in the tank into the toilet bowl. The toilet may need to flush more than once if it’s leaking or not shutting correctly. Remove the flapper valve and shut off the water supply to the bathroom to remedy this. Please turn on the water supply again after replacing it with a fresh one.
Adjust the Water Level
An unacceptable water level in the tank might cause the issue of having to flush twice. Lifting the tank lid and looking at the water level while the tank is full can allow you to determine whether that is the case. It ought to be a half-inch or so below the overflow tube. If there is not enough water in the tank, raise the water level by adjusting the fill valve at the bottom.
Replace the Toilet
It could be time to replace your toilet if you’ve attempted the fixes above and nothing has worked. Higher water costs and more clogs may result from an outdated, inefficient bathroom. Modern toilets are designed to consume less water each flush, and some even support dual flushing so that you may save water and money. A new toilet may be installed swiftly and effectively by a qualified plumber.
Some research and expertise are needed to fix a toilet that has to be flushed twice. As previously said, suggested fixes include the following:
- Looking for obstructions.
- Checking the flapper valve.
- Changing the water level.
- Replacing the toilet.
Call Elizabeth Plumbing Services at (901) 290-1110 for toilet repair assistance, or contact us online. Since 2010, our plumbing specialists have provided comprehensive plumbing solutions to homes and businesses in Memphis and the surrounding areas. For plumbing problems, we are accessible around the clock.
